It appears that you are within the Hong Kong, if this is not correct please select the correct location from the options below

AIS700 - Class B Transceiver

The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver with a built-in antenna splitter.

Product Options
AIS700 - Class B Transceiver

Enhanced Situational Awareness with AIS700

The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with any multifunction navigation display systems. As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat’s information too helping you to be seen on other vessels’ systems.

AIS700 and Axiom 9 Chartplotter

AIS700 Key Features

  • Full transmit and receive AIS for enhanced situational awareness and safety
  • Latest SO-TDMA technology for longer range and faster performance
  • Built-in antenna splitter simplifies installation with existing VHF radio antenna
  • NMEA2000, NMEA0183, PC (setup & diagnostics) and SeaTalkng compatible
  • Software or hardware switchable Silent Mode for enhanced security when needed.

AIS700 Models


AIS700 - CLASS B WITH SPLITTER SKU: E70476

AIS700 - CLASS B WITH SPLITTER


AIS700 Resources

Environmental
Relative humidity

Up to 93% @ 40°C (104°F)

Waterproof rating

IPx6, IPx7

Storage temperature

-20°C to +75°C (-4°F to 167°F)

Operating temperature

-15°C to +55°C (5°F to 131°F)

AIS
Operating frequency

Transmitting: 156.0MHz to 162.025 MHz, Receiving: 156.0MHz to 174.0 MHz

Class

B (transceiver)

AIS performance

5 W SOTDMA

Channel spacing

25 kHz

Receiver Qty

2

Transmitter Qty

1

Physical
VHF antenna connection

SO-239 co-axial

VHF radio connector type

SO-239 co-axial

NMEA 0183 connection

Port 1 (MFD connection): HS (IEC 61162-1) compliant, bi-directional, RS422 levels, 4 wire interface (differential signalling), configurable baud rate, Port 2 (Instrument connection: (IEC 61162-1) compliant, bi-directional, RS422 levels, 4 wire interface (differential signalling), configurable baud rate

USB connection

Micro-B

Dimensions

Height: 132.55 mm (5.22 in), Width: 171.65 mm (4.81 in), Depth: 57 mm (2.24 in)

NMEA 2000 connection

DeviceNet connector

Silent mode switch connection

Bare-ended wires x 2

GNSS antenna connector type

50Ω TNC co-axial

GNSS (GPS)
GNSS compatibility

GPS, GLONASS

Cold start acquisition

26 seconds (nominal)

Channels

72

Power
Operating voltage range

9.6 V dc to 31.2 V dc

Power consumption

3 W

Fuse rating

3 A

Peak current @ 12 V dc

2.5 A

Nominal supply voltage

12 V dc / 24 V dc

Peak current @ 24 V dc

1.25 A

LEN (NMEA 2000 Load Equivalency Number)

1

What's in the box?


1

AIS transceiver

2

GNSS antenna including fitted cable 10m (33 ft)

3

Power/data cable 2m (6.56 ft)

4

VHF Radio cable 1m (3.28 ft)

5

DeviceNet to SeaTalkng adaptor cable 1m (3.28 ft)

6

GNSS antenna gasket

7

GNSS antenna pole mount

8

AIS transceiver fixings screws (No.8x19) x 4

9

GNSS antenna pole mount screws x 3

10

Documentation

11

GNSS antenna surface mount fixings: Thumbs nuts x 3, Studs (M3x40) x 3