Evolution autopilot actuator control unit for Type 1 hydraulic, mechanical linear, and rotary drives
The ACU-200 (Actuator Control Unit) is a key component for Evolution autopilot systems. The ACU-200 houses the main power and drive electronics for direct connection to your vessel’s steering system and 12-volt DC electrical source. Combine with an EV-1 sensor, autopilot control head, and Type 1 hydraulic, mechanical linear, or mechanical rotary drive a complete autopilot system.
Autopilot for medium to large powerboats with hydraulic steering
Autopilot for mid-sized sailboats with mechanical steering
Autopilot drive for boats with hydraulic steering 80-230cc (4.9 - 14.0in3)
Electric rotary autopilot drive for vessels up to 11,000 kg (24,000 lbs.) displacement
Mechanical linear autopilot drive for boats up to 11,000 kg (24,000 lbs) displacement
Evolution autopilot sensor core for traditional steering systems
Autopilot control head for Evolution autopilots with intuitive push-button operation designed for sailboat installations
Autopilot control head for Evolution autopilots. Push buttons and rotary control designed for powerboat installations
ACU-200 Evolution autopilot actuator control unit SKU: E70099
| Output | |
|---|---|
| Drive clutch output | Up to 2.0 A continuous, selectable between 12 / 24 V |
| Drive current output | Maximum continuous 15 A at supply voltage |
| Physical | |
|---|---|
| Dimensions | Width: 285 mm (11.2 in), Height: 211.5 mm (8.3 in), Depth: 64.5 mm (2.5 in) |
| Weight | 2.2 kg (4.84 lbs) |
| Environmental | |
|---|---|
| Relative humidity | Max. 93% |
| Waterproof rating | Drip resistant |
| Storage temperature | -30 °C to +70 °C (-22 °F to 158 °F) |
| Operating temperature | -20 °C to +55 °C (-4 °F to 131 °F) |
| Conformance | |
|---|---|
| Standards | Europe: 2004/108/EC, Australia and New Zealand: C-Tick, Compliance Level 2 |
| Power | |
|---|---|
| Power consumption (standby) - main power supply | 300 mA (12 / 24 V) |
| Power output to SeaTalkng bus | 3 A @ 12 V (fuse protected at 3 A) |
| Power consumption (standby) - SeaTalkng bus | 20 mA (12 V) |
| Nominal supply voltage | 12 / 24 V dc |
| Operating voltage range | 10.8 V dc to 31.2 V dc |
| LEN (NMEA 2000 Load Equivalency Number) | 1 |
| 1 | ACU unit |
| 2 | Rudder angle reference sensor / transducer (supplied with specific system packs only) |
| 3 | Cable ties |
| 4 | Mounting screws |
| 5 | Documentation |
